Skip to main content

Williams has finally put its 2026 car on track, completing a low-key filming day at Silverstone after missing the entire Barcelona shakedown and becoming the last team to run its new machine.

Running under typical winter conditions at Silverstone for a filming day, the Mercedes-powered car drew attention simply by turning a wheel, with observers keen to see what Williams has been developing out of sight.

The team later released its first official image of the real car - a frontal view that revealed only part of the story. As already confirmed in launch data, Williams has opted for a pullrod front suspension, a solution shared only by Alpine and newcomer Cadillac, a relative rarity on the grid.

What stood out, however, was the geometry. Like Aston Martin, Williams has mounted the front arm of the upper wishbone unusually high on the chassis, while the rear arm sits much lower. The layout creates a pronounced anti-dive effect, designed to limit how much the nose pitches under heavy braking.

Other visible details included a relatively wide nose, attached to the front wing via two outward-protruding brackets. That solution contrasts with the approach used by Mercedes and Aston Martin, which connect the wing to the nose via a central element.

The notably round and large airbox also caught the eye, although it is not as extreme as the Racing Bulls solution.

Williams' absence so far has already been factored into early pecking order assessments. "Williams didn't get around to driving, and Aston Martin only got to the end of the week right at the end," said McLaren CEO Zak Brown, referring to the Barcelona shakedown.

"So you really have no idea what Williams is up to. It looks like it's between the four major teams," he said.

"It's hard to say anything about the order, but if you were to go to Las Vegas now, Mercedes would probably be the favourite."

Share this article

3 F1 Fan comments on “Williams Unveils Long-Awaited FW48: First Design Clues Revealed”

  1. CanadianEh

    The rules keep getting tighter and tighter. Upper and lower limits for all dimensions and masses. Not a whole lot of bandwidth for conventional designers to be original.

    Ken Tyrell came out with the P34 which had a successful, competitive season in 1976. It blew everyone's mind, and it won races.

    The Euro-centric FIA (read "bloated Bureaucracy") is all backwards: They have defined basically a spec car and eliminated free-thinking innovation. Drivers strike dramatic poses and emote like their life is a Shakespearean tragedy. And all the while, the excitement of F1 is being lowered and homogenized and made "eco-friendly" .

    The worst part is, the fans are paying exorbitant prices for a 'sport' that has all the signs of dying. The inevitable has been forstalled by slick media presentation, but the reality is, F1 is becoming boring.

    • shroppyfly

      And I thought the highlight of the 76 season was advertising condoms on an F1 car, but i was very young at the time

    • Andy

      It's why they have to dramatically change the rules every few years, so there is a reason to watch again.

      I've said it before, they should do away with all the rules surrounding what the car should look like and just have basic ones saying the wheel-base has to be no more than this and the over-all size of the car that, and you HAVE to have these things for safety. Give everything else over to the desogners and engineers and see what rocket ships they can come up with. If they did that, then we could see some proper different thinking and designs.

💬 Join the conversation — see the latest comments from F1 fans →

Comments are closed.

Most recent 10 F1 News items:

✅ Check out all our F1 News & Updates  »

Join our FREE weekly F1 Newsletter

Enter your email address & confirm your subscription

Get Your Tickets For Next Events

Last News Update

Latest Video Update

Last Classification

Newest Sound or Podcast